Park plan

Fit the fields before you paint one.

Measure the open grass, list the fields you need, set the run-off between them. Get a drawing and where each field's first corner goes.

Park plan

Open area 240 yd × 150 yd

Open area: 240 yd × 150 yd
Fields placed: 3 of 3
Gap / edge margin: 10 yd / 5 yd
Ground used: 150 yd × 135 yd

Scale drawing. P is the reference corner of the open area (bottom left); "along" runs along its long edge, "in" across it. The dashed line is the edge margin.

Where each field's corner 1 goes, measured from P, and its own size on the ground
Field	Corner 1: along from P	Corner 1: in from P	Runs along / across	Its diagonal
1. Full turned 90°	15 ft	15 ft	70 yd / 110 yd	391 ft 2 in
2. U12 turned 90°	255 ft	15 ft	50 yd / 75 yd	270 ft 5 in
3. U10	255 ft	270 ft	60 yd / 40 yd	216 ft 4 in

Corner 1 is each field's corner nearest P. From it, the field runs "along" in the direction of the area's long edge and "across" into the area. Square each field with its own diagonal, then lay it out on the Field layout page.